News, Products and Information for Plumbing & Mechanical Contractors
Sponsored by

Products

Thermostatic valve and showerhead
www.moen.com
Get total shower flexibility with MoenÕs ExactTemp 3/4" thermostatic valve and Velocity rainshower showerhead. The powerful ExactTemp valve more than doubles the flow of water seen with typical shower valves, which provides an invigorating shower experience. Showers using this valve can also be customized to include components such as multiple showerheads, body sprays and handshowers.

Tank for instant water dispenser
www.insinkerator.com
This stainless-steel, 2/3-gallon tank for instant hot water dispenser from

In Sink Erator incorporates a tool-free plumbing connection for easy installation. A handy control on the front panel easily adjusts temperature. Stainless steel construction ensures a longer service life, while the unit incorporates dry-start protection for worry-free installations. Its compact design fits easily under almost any sink. The unit comes shipped with a filtration system.
Two horsepower submersible grinder pump
www.littlegiant.com
The Model GP grinder pump from Little Giant Pump Co., incorporates a heavy-duty, capacitor-start, capacitor-run motor with upper and lower single row ball bearings, and a short shaft design to minimize shaft deflection, improve grinding, and help maintain the sharpness of the cutters. These features make this robust centrifugal grinder pump ideal for light commercial applications or residential low-pressure sewer systems or applications sited in difficult soil or topography. Its anti-roping design features self-aligning cutters, engineered with close clearances for better grinding, lower power draw (13.9 amps), fewer start relay engagements and less chance of roping of stringy materials.
Drainage system
www.siouxchief.com
The Finish Line from Sioux Chief is a unique new drainage system that allows for adjustment of the drain or cleanout after the pour. The secret lies in the design of a system, which incorporates a coring sleeve and temporary coring plug that allow the drain or cleanout to be installed flush to the concrete pour. The finish fixture, clean and free from job site abuse, can then be adjusted up or down to meet the finished floor covering.
Drain cleaner
www.drainbrain.com
The Model ÒEÓ gasoline powered drain cleaner from General Pipe Cleaners blends power and maneuverability for rapid removal of clogs in large lines and long runs up to 500 feet down the line. ItÕs capable of coupling to either sectional cables to clear up to 14" lines or 5/16" municipal rods to clear lines up to 24" in diameter. A powerful 6.5 hp engine drives the Model ÒEÓ Rodrunner with an easily accessible throttle control on the handle. Drive speed is set at 100 to 200 rpm for municipal rods and 200 to 400 rpm for sectional cables. The ÒHot-ShiftÓ transmission lets the operator switch from forward to reverse without the need for a clutch. Also features a 3/4Ó lifetime lubricated drive chain and safety slip clutch to protect cables and rods against excessive torque build-up.
Distinctive faucet design
www.matco-norca.com
NAPOLI has been added to an ever-expanding faucet line from
Matco-Norca, and provides a distinctive, contemporary look, providing both elegant design and quality workmanship. The NAPOLI line of faucets features both ceramic and washerless cartridges with solid brass handles and brass waterways, providing many years of service at affordable prices.
Flush valve classic replica
www.sloanvalve.com
The Royal Classic is a replica of the flush valve made by Sloan Valve Co., in 1906, with modern-day updates to the time-proven technology. Designed with the original RoyalÕs bell-like top and white, porcelain handle. Available in brushed nickel, polished nickel, polished brass, chrome plate and gold plate finishes. Dual filtered fixed by-pass diaphragm stops debris and prevents run-on; non-hold-open handle shuts off automatically regardless of position. Non-adjustable, water-conserving design; high-copper, low-zinc brass castings to protect against dezincification. An adjustable tailpiece compensates for off-center installations.
PEX in-slab or ground work solution
www.holdrite.com
The PEXRITE pop-up #707 (single run) & #708 (double run) from Hubbard Enterprises is a 90-degree in-slab flexible tubing solution that will reduce installation costs and hits the target every time. The design allows for side entry of tubing, as well as multi-run versatility with interlocking feet. Supports up to 3/4" PEX tubing with sleeving, as well as compatible with up to 1" tubing of soft copper or flexible conduit.
Single-pressure control valve
www.danfoss.com
Cycle Gard CI, series CIN101 valve from Danfoss Flomatic Corp., automatically adjusts to provide constant pressure at different flows and works with any pump. This simple mechanical device will save electricity, eliminate water hammer and extend service life of the pump while providing a constant pressure regardless of water flow. The field adjustable external by-pass provides full control of the tank fill rate for adjustable run time of the pump. The Model Cycle Gard CI has a size range from 11/2"Ð8" and is available with a 2" groove connection.
Threading machine stands
www.ridgid.com
Redesigned RIDGID stands (models 100A, 150A and 200A) from Ridge Tool Co., give more portability to end users on the job site. The redesigned threading machine stands feature horizontal mounting that provides a stronger joint and easier transport on the jobsite. Large diameter wheels make threading machine stands ideal for shop use as well as for in the field. Constructed of heavy-walled steel tubing, threading machine stands give users a stable and solid work platform.The new stands feature adjustable widths that are compatible with the 535, 1822 and 1224 threading machines.